Questions are tagged according to the following scheme, in
order to support searching:
{T} aspects of the clamps themselves
{X} cross relations between companies
{P} personal history of the makers
{C} corporate history of the makers
{D} dealers and distributors
{U} users
{T}
Where are the Bliss bar clamps? (There are Aldrich made examples
of bar clamps.)
PARTIAL ANSWER: I have seen a 6 foot R Bliss and Co pianoforte
clamp. The screw did not end with a ferrule and pin, but instead
had a 2 x 2 x 3 inch block, held onto the end of the screw by a
frog engaging a groove. The headstock had the marker's mark.
last revised and validated
Copyright © 1996- Wooden Clamp Journal