Sargent

Only the 800 Series is known.

Information is taken from the reprint of the 1922 catalog found in The SARGENT Tools Catalog Collection, published by Astragal Press, with Foreword by Paul Weidenschilling.

The catalogs of 1894 and 1910 do not show any wooden hand screw clamps.

Dimensions of 800 Series

Sargent Dimensions
Model	Spindle Length	Spindle Diameter	Jaw Length	WxD Size
800	28	1 1/4	24	3 x 3
801	26	1 1/4	22	2 3/4 x 2 3/4
802	24	1 1/4	20	2 5/8 x 2 5/8
803	22	1 1/4	20	2 1/2 x 2 1/2
804	22	1 1/8	18	2 1/2 x 2 1/2
805	20	1 1/8	18	2 3/8 x 2 3/8
806	20	1	16	2 3/8 x 2 3/8
807	18	1	16	2 1/4 x 2 1/4
808	18	7/8	14	2 1/8 x 2 1/8
809	16	7/8	14	2 x 2
810	16	7/8	12	1 7/8 x 1 7/8
811	14	3/4	12	1 3/4 x 1 3/4
812	12	3/4	10	1 5/8 x 1 5/8
813	10	5/8	8	1 3/8 x 1 3/8
814	8	5/8	7	1 1/8 x 1 1/8
815	6	1/2	5	1 x 1
816	5	3/8	4	7/8 x 7/8

last revised and validated